Plastic Trims Looking Grey? Bring Them Back to Life with Solution Finish
By Nargish Ansarion
Plastic Trims Looking Grey? Bring Them Back to Life with Solution Finish Black Trim Restorer 12oz
Your car’s exterior is more than just paint and chrome. Those black plastic trims—bumpers, door surrounds, mirror housings, rubber seals—play a huge role in the overall look of your ride. Over time, sun, weather, and oxidation take their toll, turning rich black trim into dull, chalky grey. But you don’t need to replace parts or settle for that faded look.
Enter Solution Finish Black Trim Restorer 12oz — a professional method for restoring trim to deep, rich, original black. If you want your car to look well maintained, sharp, and fresh, read on.
Why Do Plastic Trims Fade & Turn Grey?
- UV Exposure: Direct sunlight degrades plastics, breaking down pigments and causing oxidation.
- Oxidation & Weathering: Rain, snow, heat, pollutants—all contribute to breaking down surface layers of trim.
- Cleaning Products / Dressings: Some cheap dressings or waxes leave residue or use silicones that trap dirt, gas, or degrade over time.
- Lack of Protection: No regular care, infrequent restoration, and exposure without sealants accelerate fading.
Faded trims aren’t just cosmetic. They can drag down your vehicle’s visual appeal—and even resale value.
What Is Solution Finish Black Trim Restorer 12oz?
Here’s what makes Solution Finish a top-tier product for restoring faded black trims:
- Restores originally black surfaces to deep, rich black without giving a “wet” or overly shiny look.
- Dries quickly, leaving no greasy residue.
- Silicone-free formula, uses natural oils, is VOC‑compliant, and formulated for professional use.
- Uses advanced polymer technology to give long-lasting protection.
- Suitable for multiple surfaces: plastics, trims, rubbers etc.
The Remax Auto Concepts listing shows that the 12 oz size is available at a competitive price in India.
Step‑by‑Step Guide: How to Use Solution Finish Properly
Getting the best results means proper preparation and following the right steps. Here’s a recommended process:
Gather Supplies
- Solution Finish Black Trim Restorer 12oz (from Remax Auto Concepts)
- Microfiber cloths
- Microfiber applicator pad or sponge
- Isopropyl Alcohol (IPA) or trim cleaner / panel wipe
- Gloves (nitrile recommended)
- Optional: masking tape (to protect surrounding paint/glass)
Clean the Trim Surface
- Wash off dirt, grime, road tar etc.
- Use IPA or panel wipe to remove oils, silicones, or wax residue—especially if previous dressings have been used. This opens up the pores of the plastic so the restorer can penetrate.
- Let the surface dry completely.
Apply Solution Finish
- Shake the bottle well.
- Put a small amount onto applicator pad or sponge.
- Apply a thin, even coat in one direction or in circular motion for full coverage.
- Let it dwell / penetrate for about 1–2 minutes.
Buff Off Excess
- Use a clean microfiber cloth or foam pad to wipe off or buff excess product. This helps avoid streaks and ensures uniform finish.
Curing Time
- Let the treated area dry / cure. For best results, avoid washing or exposing to heavy water for at least 4 hours (some sources suggest up to 6 hours).
- Avoid applying in direct sunlight or on a hot surface. Shade and cooler temperature helps.
Multiple Layers (if needed)
- If the trim was very heavily faded, doing 2 or more thin layers may yield deeper, more uniform color. Just make sure each layer is cured/dried before applying the next.
Expected Results & Longevity
- On first application, in normal conditions, you can expect the effect to last around 6‑8 months.
- With regular maintenance and avoiding harsh treatments, subsequent applications may last even longer (12 months or more).
- The trim should look rich, deep black, fresh, but not overly glossy or “wet” unless desired.
Common Mistakes & Tips for Best Outcome
| Mistake |
Why It Hurts |
Tip to Avoid |
| Applying on hot or sun‑exposed surfaces |
The product may cure too fast, dry unevenly or leave streaks |
Work in shade, or when trim is cool |
| Using too much product / heavy coat |
Excess stays on surface, can attract dirt, look patchy |
Apply thin even coats; always wipe off excess |
| Not cleaning or removing old dressings |
Old wax/silicone prevents the product from penetrating properly |
Use IPA / proper cleaner to remove residue |
| Letting water hit before curing |
Can wash away or damage the finish before it sets |
Avoid rain or wash for at least 4‑6 hours after application |
| Applying to painted or glass surfaces by accident |
Product may stain or leave marks |
Mask or carefully avoid paint/glass; wipe off immediately if contact happens |
Why Choose Remax Auto Concepts
- Authentic Stock – The Solution Finish Black Trim Restorer 12oz you get is genuine, made in USA, silicone‑free, natural oils, VOC‑compliant.
- Competitive Price in India – Remax Auto Concepts offers good value.
- Support & Advice – Buying from auto‑detailing focused specialist shop gives you access to advice, proper usage tips, and good after‑sales if needed.
Frequently Asked Questions (FAQs)
Here are some common questions people have when considering or using Solution Finish Black Trim Restorer 12oz, along with answers:
Is Solution Finish a dye or a paint?
It is not a paint. It is a restorer composed of natural oils and polymer technology that penetrates plastic and vinyl surfaces to restore the original black shade—not just covering up with paint.
Will it leave a wet/glossy finish?
No. One of its selling points is that it restores deep, rich black without the “wet look” or greasy shine.
Can I use it on rubber trims / seals, or only hard plastic?
Yes. It can be used on plastics, trims, mud flaps, rubber seals, vinyl etc. It’s designed for many exterior black surfaces.
How long does the effect last?
Typically 6‑8 months for a first treatment under normal exposure. With maintenance, it may last longer (up to or beyond a year).
Is it safe in sun and rain? What about curing / washing afterward?
Best to apply in shade, when trim is cool. After application, avoid water, heavy rain or washing for at least 4‑6 hours to allow proper curing.
Will it stain paint, glass, or wheels?
Yes, if accidentally applied. The product can stain painted or glass surfaces if not wiped off immediately. Be careful, use masking if needed, and clean off overspray.
How much coverage do I get with 12oz?
12oz is plenty. Depending on size of vehicle and amount of trim, it can cover multiple vehicles. A little goes a long way.
How often should I re‑apply?
When you begin to see fading returning—usually after ~6‑8 months. With good care, cleaning, and avoiding harsh chemicals, you might get 12 months or more.
Is it environmentally friendly?
It is silicone‑free, uses natural oils, and is VOC‑compliant, making it safer than many mass‑market dressings filled with silicones.
Does it protect beyond restoring color? For example, UV protection?
Yes, by restoring the pigments and using polymer technology, it gives a level of protection against future UV damage. But over time UV will still fade plastics, so regular maintenance helps.
Faded, grey plastic trims can really drag down the visual impact of your car. But you don’t need to replace them. With the right product and the right steps, you can bring them back to life. Solution Finish Black Trim Restorer 12oz is one of the best on the market for this job—professional grade, long‑lasting, natural, and effective.
If you’re ready to restore your trims and give your car that fresh, black contrast again, get your Solution Finish Black Trim Restorer 12oz right now from Remax Auto Concepts.
👉 Click here to buy now — your trims will thank you.
Need help choosing, prepping your surfaces, or doing the application? Reach out to us at Remax Auto Concepts. We’re here to ensure you get the best results and make your vehicle look its best again.